Description
Newest Version Coming—-Improved largely with below features
- Increased ON button;
- Increased 10 Levels of brightness adjustment;
- Increased 4 timer button (0.5h, 1h, 2h, 3h);
- Optimized 5 dynamic modes and they are much more beautiful than ever and much more different from each other;
- Enhanced the largest brightness by 25%;
- The largest waterproof capability reach up to 20 meters;
Waterproof Function Tips:
- Please make sure the 2 sealing rings are both in correct position.
- Please do use your biggest strength to screw up very tightly before put pond lights into water. If not tight enough the 2 sealing rings would not work collaboratively, that will let water in.
Remote Function Tips:
- Please remove the plastic insulating film on the bottom of remote before use led lights.
- Please keep the remote from water, and keep them dry. Once water get in, submersible led lights will stop work.
- Recommended depth to dive the waterproof led lights is less than 2 ft to ensure control sensitivity (water absorb all kinds of signals)
- Press “off” to turn off the timer, timing would be refreshed by the last timer button you pressed; Other buttons would not interrupted the timer except OFF and Timer button;
- Please long press the button “ON” on the remote for about 1.5 seconds to activate all the lights. After turning on, no need to long press, the light will be very sensitive to react what you set.
Battery Compartment Tips:
- Please protect rechargeable battery compartment from water damage when charging.
- Switch on the fountain lights and make it standby for control.
- Please do not use the waterproof led when charging, please do not discharge waterproof led when charging.
- Indicator glows red means in charging, green means full charged;
Fixing Method Tips:
- The magnet is strong magnet, but it’s not designed to use on a Smooth vertical surface. If you want to attach to that, use the suction cups because they are born for this specially. No matter how big the magnet is, it will be difficult for a stuff attach to a vertical and smooth surface stably. It’s just an easy knowledge of physics. But rough vertical surface will make it work. So please understand that’s not magnet fault.
- The suction cups could be used both in air and underwater on Flat and Smooth surfaces. No matter where you use it, please clean the surface you want to attach to, make sure there is no any stuff between the surface and suction cups. Those causing lubricating effect would defeat it, like detergent, shower gel, etc. So clean the surface is very important before attach to with suction cups.
Specifications:
- Capacity: 1500mAh.
- Input Voltage: 5V.
- Max.Charging Current: 1.5A.
- Working Temperature: 0-45℃.
- Remote Battery: 1 x CR2025 Button Cell (Included).
- LED: 10 x SMD LED Chips.
- Chip Type: WRGB
Reviews
There are no reviews yet.